Pro-series 51063 51 Receiver Manuel d'utilisateur télécharger pdf

Installation Instructions

Chevrolet S-10 Pickup

GMC S-15 & Sonoma Pickup

Isuzu Hombre

Part Numbers:

51063

44062

Equipment Required:

Wrenches: 3/4 Socket & Wrench

Drill Bits: 1/2”

Note: Fasteners typical both

sides

1. Lift the hitch up into place between the bumper brackets.

2. Insert a 1/2” carriage bolt with the block down through the large hole at the end of the frame and into the hole in the hitch bracket. Install a

1/2” flat washer, and 1/2” lock washer, and 1/2” nut on the bolt. See diagram above. Repeat for the other side.

3. Insert a 1/2” hex head bolt with a 1/2” flat washer through the bumper bracket and into the hitch bracket. Install a 1/2” flat washer, 1/2” lock

washer, and 1/2” nut on the bolt. See diagram above. Repeat for the other side. On some models the bumper brackets will have to be drilled.

Use the holes in the hitch brackets as a guide to drill 1/2” holes through the bumper brackets.

Rev. D6-27-0644062INSheet 1 of 1

z 2002, 2004, 2006 Cequent Towing Products

Bolt 1/2-13 X 1.50Qty. (2)

Flat Washer 1/2Qty. (6)

Hex Nut 1/2-13Qty. (4)

BlockQty. (2)

Lock Washer 1/2Qty. (4)

Carriage Bolt 1/2-13 X 2.00Qty. (2)

Tighten all 1/2 fasteners with torque wrench to 70 Lb.-Ft. (95 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 44413

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

350 (159 Kg)3500 (1589 Kg)

Weight Carrying

Ball Mount

500 (227 Kg)5000 (2270 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: PU3

Warning: Do Not lubricate threads, bolt failure

may occur due to over tightening.

Warning: Do Not drill or weld to this hitch.

Important notes

Use only Towing Products supplied or approved

bolts, locknuts, and washers to install this hitch.

SERIES 51®

Form: F205 Rev A 5-6-05

Installation Instructions 1

Résumé du contenu

Page 1 - Installation Instructions

Installation InstructionsChevrolet S-10 Pickup GMC S-15 & Sonoma Pickup Isuzu HombrePart Numbers:5106344062Equipment

Commentaires sur ces manuels

Pas de commentaire

Pro-series 51063 51 Receiver Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Pro-series 51063 51 Receiver. Pro Series 51063 51 Receiver User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Pro-series 51063 51 Receiver