Pro-series 63125 BIKE CARRIERS Manuel d'utilisateur télécharger pdf

ITEM:

DESCRIPTION:

63125

4 PLACE TOWING BIKE CARRIER

ASSEMBLY INSTRUCTIONS:

1. Position the “Bike Cradles” onto the top plate of carrier as shown in Diagram 1.

Attach “Bike Cradles” to top plate with the ¼” x ½” Lg. Screws using the Allen

Wrench supplied.

2. Assemble both tubular sections together as shown in Diagram 1 and fasten

together with two 5/16” x 2-1/2” Lg. Carriage Bolts and Lock Nuts. Tighten

5/16-18 Gr5 bolts to 17 ft-lb.

3. Insert the hitch ball through bike carrier and ballmount and install the lock

washer and hex nut onto the hitch ball.

NOTE: A ball with ¾” diameter X 3-1/8” long shank is required for towing

– sold separately.

4. Tighten hitch ball to 160 ft-lb.

5. Place the bike rack receiver into your receiver hitch. Secure rack with hitch

pin and clip. (See Diagram 2)

LOADING BIKES ONTO CARRIER:

1. Load one bike onto the first “Bike Cradle” (closest to vehicle) so the horizontal

seat tube of the bike rests on the rubber lined “Cradle”. Adjust position of

bike to find its center or gravity. Secure bike to “Cradle” using both Hook-N-

Loop Straps on the “Cradle” as shown in Diagram 3. Velcro straps must be

fully engaged and wrapped tight against bike tube.

2. Position the next bikes onto “Cradle” so the handle bars face in opposite

direction and secure using both Hook-N-Loop Straps (See Diagram 3)

The series of slots in the Top Plate have been provided to allow use of a

cable and padlock to protect bikes from theft. (sold separately)

5/16 x 2-1/2” Lg.

Carriage Bolt

Locknut

(2) Places

¼” x ½” Lg. Screw

(8) Places

Bike Cradle

ITEM:

DESCRIPTION:

Hitch Ball

Cequent Performance Products

47774 Anchor Court

Plymouth, MI 48170

Technical Service: (888) 521-0510

63125N Rev C 4-29-13

Printed in Taiwan

Diagram 1

Diagram 3

Pin & Clip

Hook-N-Loop Strap

Hitch Ball

Lock Washer

Hex Nut

INSTRUCTIONS FOR FOLDING THE RACK:

Remove the “Bail Lock Pin” from the bike carrier.

WARNING: Removal of this pin will allow the bike carrier to pivot rearward or forward.

Be certain to hold the bike carrier securely when removing the locking pin to prevent the bike

carrier from falling suddenly, Causing personal injury or vehicle damage. To remove the

“Bail Lock Pin” simply deflect the bail wire away from the small end of the pin and pull the pin

free of the carrier.

NOTE: Do not drop or let the support tube fall freely. Make sure that your hands and fingers

are clear of the hinging area during this operation. DO NOT attempt to move the vehicle

unless the Bike Carrier is in the upright position and securely locked.

Diagram 2

Diagram 4

1 2 3 4 5 6

DESCRIPTION: 1

Résumé du contenu

Page 1 - DESCRIPTION:

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERASSEMBLY INSTRUCTIONS:1. Position the “Bike Cradles” onto the top plate of carrier as shown in Diagra

Page 2

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERIMPORTANT NOTES:• This bicycle rack has been designed to carry four (4) bikes, as long as the maximu

Page 3

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERINSTRUCTIONS DE MONTAGE :1. Placer les berceaux sur la plaque supérieure du support à vélos, comme in

Page 4

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERREMARQUES IMPORTANTES :• Ce support à vélos a été conçu pour transporter deux (2) vélos, en autant qu

Page 5

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERINSTRUCCIONES DE ENSAMBLE:1. Coloque las “bases de las bicicletas” en la placa superior del cargador

Page 6

ITEM:DESCRIPTION:631254 PLACE TOWING BIKE CARRIERNOTAS IMPORTANTES:• Esta bandeja está diseñada para cargar dos bicicletas, siempre que el peso máxim

Commentaires sur ces manuels

Pas de commentaire

Pro-series 63125 BIKE CARRIERS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Pro-series 63125 BIKE CARRIERS. Pro Series 63125 BIKE CARRIERS User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Pro-series 63125 BIKE CARRIERS