Pro-series 51097 51 Receiver Manuel d'utilisateur télécharger pdf

Installation Instructions

Ford F-150

Part Numbers:

51097

Hitch Shown In Proper Position

Equipment Required:

Wrenches: Open end 3/4 wrench & 7/8”

Figure 1.

Bumper

bracket

Removal of the spare tire can make installation easier, however, removal not necessary.

1. Raise hitch into position as shown in Figure 1. Use fasteners to attach the hitch uprights to the bumper bracket.

2. Attached remaining fasteners as shown. Item 6 must be sandwiched inside slot on bumper bracket. The hitch brackets and

the vehicle bracket will be drawn together.

3. Torque all fasteners to specifications shown below.

4. Reinstall spare tire, if it was removed prior to hitch installation. Make sure spare tire does not contact bolts.

Rev. B1-21-0951097NSheet 1 of 3

z 2008, 2009 Cequent Towing Products

Flat washer 1/2”Qty. (2)

Lock washerQty. (2)

Hex nut, 1/2-13Qty. (4)

Spacer roundQty. (2)

Conical washerQty. (6)

Spacer ¼” X 2.50 X 1.75Qty. (2)

Hex bolt, 1/2-13 X 2.0 Gr5Qty. (4)

Tighten all 1/2 GR5 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: 51097F

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

500 (227 Kg)5000 (2270 Kg)

Weight Carrying

Ball Mount

1000 (454 Kg)10,000 (4540Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location:

Bumper bracket one piece.

Shown broken for clarity

Round spacer

washer (Item 6) fits

into slot on bumper

bracket

Note: Fasteners typical

both sides

Bumper

bracket

Hitch side

bracket.

Figure 2.

Hitch

Uprights

Item 6 must be sandwiched

inside slot on bumper

bracket.

Bumper bracket

Bumper

1 2 3

Résumé du contenu

Page 1 - Installation Instructions

Installation InstructionsFord F-150Part Numbers:51097Hitch Shown In Proper PositionEquipment Required:Wrenches: Open end 3/4 wrench & 7/8”Figure 1

Page 2 - Instructions d’installation

Instructions d’installationNuméros de pièces :Attelage montré dans la position appropriéeÉquipement requis :Clés : Clé 3/4 à fourche & 7/8”Rev. B1

Page 3 - Instrucciones de instalación

Instrucciones de instalaciónNúmeros de partes:El enganche se muestra en laposición correctaEquipo necesario:Llaves: Llave abierta de 3/4 & 7/8”Rev

Commentaires sur ces manuels

Pas de commentaire

Pro-series 51097 51 Receiver Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Pro-series 51097 51 Receiver. Pro Series 51097 51 Receiver User Manual [en] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Pro-series 51097 51 Receiver